Describing the combustion of log wood and others solid fuels with complex geometry, considerable water content and often heterogenous struture is a nontrivial task. Stochastic Cellular Automata models offer a promising approach for modelling such processes. Combustion models of this type exhibit several similarities to the well-known forest fire models, but there are also significant differences between those two types of models. These differences call for a detailed analysis and the development of supplementary modeling approaches. In this
article we define a qualitative two-dimensional model of burning log wood, discuss the most important differences to classical forest fire models and present some preliminary results.

Wood pellets have been used in domestic heating appliances for three decades. However, because the share of renewable energy for heating will likely rise over the next several years, alternative biomass fuels, such as short-rotation coppice or energy crops, will be utilized. We tested particulate emissions from the combustion of standard softwood pellets and three alternative pellets (poplar, Miscanthus sp., and wheat straw) for their ability to induce inflammatory, cytotoxic, and genotoxic responses in a mouse macrophage cell line. Our results showed clear differences in the chemical composition of the emissions, which was reflected in the toxicological effects. Standard softwood and straw pellet combustion resulted in the lowest PM₁ mass emissions. Miscanthus sp. and poplar combustion emissions were approximately three times higher. Emissions from the herbaceous biomass pellets contained higher amounts of chloride and organic carbon than the emissions from standard softwood pellet combustion. Additionally, the emissions of the poplar pellet combustion contained the highest concentration of metals. The emissions from the biomass alternatives caused significantly higher genotoxicity than the emissions from the standard softwood pellets. Moreover, straw pellet emissions caused higher inflammation than the other samples. Regarding cytotoxicity, the differences between the samples were smaller. Relative toxicity was generally highest for the poplar and Miscanthus sp. samples, as their emission factors were much higher. Thus, in addition to possible technical problems, alternative pellet materials may cause higher emissions and toxicity. The long-term use of alternative fuels in residential-scale appliances will require technological developments in both burners and filtration.

Wood log stoves are a common residential heating technology that produce comparably high pollutant emissions. Within this work, a detailed CFD model for transient wood log combustion in stoves was developed, as a basis for its optimization. A single particle conversion model previously developed by the authors for the combustion of thermally thick biomass particles, i.e. wood logs, was linked with CFD models for flow and turbulence, heat transfer and gas combustion. The sub-models were selected based on a sensitivity analysis and combined into an overall stove model, which was then validated by simulations of experiments with a typical wood log stove, including emission measurements. The comparison with experimental results shows a good accuracy regarding flue gas temperature as well as CO2 and O2 flue gas concentrations. Moreover, the characteristic behavior of CO emissions could be described, with higher emissions during the ignition and burnout phases. A reasonable accuracy is obtained for CO emissions except for the ignition phase, which can be attributed to model simplifications and the stochastic nature of stove operation. Concluding, the CFD model allows a transient simulation of a stove batch for the first time and hence, is a valuable tool for process optimization.

This paper focusses on the elaboration of the potential of the waste sector to contribute to the provision of 100% renewable energy systems. Waste is an abundant and locally available ressource and in many cases it is (at least partially) of biogenic origin, therefore pursuing political goals in waste management by energetic utilization of waste contributes towards achieving political goals in the energy as well as climate policy, too. However, it is shown based on the example of Austria that looking at energy systems on a national or international scale the waste sector is only able to contribute very little to the provision of the overall energy needed. It is different if one looks at specific energy systems in industrial sectors or on individual industrial sites. Here one must aknowledge that the energetic utilization of waste can have a high impact towards establishing renewable energy systems. Exemplarily this is shown by discussing the Austrian pulp & paper as well as the cement industry sector.

The primary energy consumption world-wide is rising constantly. Therefore it is necessary to open up renewable resources for energy production. Besides wood, the application of agricultural resources and residuals for energy production is possible, also within the range of small scale combustion units. These fuels still pose a challenge, concerning gaseous and particulate emissions. This work examines the application of straw pellets in a small scale combustion unit. Gaseous and particulate emissions, as well as the separation eciency of a secondary heat exchanger with scrubber were investigated. Compared with wood-like fuels a strong slagging of the combustion chamber could be determined. Gaseous emissions as NO_x, SO₂ and HCl, as well as the emission of particles were clearly higher than with combustions of wood. The gaseous emissions were below the considered limit value for other biogenous fuels after Art. 15 a B-VG 2007 [1]. The burnout of the gaseous phase, which can be evaluated by the emission of CO, was always good and comparable with the combustion of wood.
Using a secondary heat exchanger with scrubber (Hydrocube R of the company Schräder ) particulate emissions could be reduced by 20%. Element analysis of the particulate emissions as well as particle size measurements showed that primarily large particles were separated. A retrot of the Hydrocube R by an ionizing electrode increased the degree of separation on 60%. Besides the separation of particles, the Hydrocube R also reduced gaseous emissions like SO₂ and HCl. The absorption of these components in the condensate phase caused a decrease of the pH value. Low ph value increased the corrosion of the Hydrocube R , what could be detected by rising concentrations on Fe, Ni and Cr in the condensate.

Biochar is the product of biomass pyrolysis and gasification. One of the possible application of this product is certainly in agronomic sector, as soil amendment. However biochar use in Italy is subordinated to insert this product in fertilizer list, which biochar could be commercialized with. The aim of this paper is to know the biochar from gasification process (using an Imbert downdraft prototype), in particular investigating its potentiality as soil amendment in terms of European and Italian regulations and in terms of physical and chemical characterizations.

While reasonably accurate in simulating gas phase combustion in biomass grate furnaces, CFD tools based on simple turbulence-chemistry interaction models and global reaction mechanisms have been shown to lack in reliability regarding the prediction of NO_x formation. Coupling detailed NO_x reaction kinetics with advanced turbulence-chemistry interaction models is a promising alternative, yet computationally inefficient for engineering purposes. In the present work, a model is proposed to overcome these difficulties. The model is based on the Realizable k-ε model for turbulence, Eddy Dissipation Concept for turbulence-chemistry interaction and the HK97 reactionmechanism. The assessment of the sub-models in terms of accuracy and computational effort was carried out on three laboratory-scale turbulent jet flames in comparison with the experimental data. Without taking NO_x formation into account, the accuracy of turbulence modelling and turbulence-chemistry interaction modelling was systematically examined on Sandia Flame D and Sandia CO/H2/N2 Flame B to support the choice of the associated models. As revealed by the Large Eddy Simulations of the former flame, the shortcomings of turbulence modelling by the Reynolds averaged Navier-Stokes (RANS) approach considerably influence the prediction of the mixing-dominated combustion process. This reduced the sensitivity of the RANS results to the variations of turbulence-chemistry interaction models and combustion kinetics. Issues related to the NO_x formation with a focus on fuel bound nitrogen sources were investigated on a NH3-doped syngas flame. The experimentally observed trend in NO_x yield from NH3 was correctly reproduced by HK97, whereas the replacement of its combustion subset by that of a detailed reaction scheme led to a more accurate agreement, but at increased computational costs. Moreover, based on results of simulations with HK97, the main features of the local course of the NO_x formation processes were identified by a detailed analysis of the interactions between the nitrogen chemistry and the underlying flow field. © 2011 Taylor & Francis.

Minimizing carbon dioxide emissions whereas keeping up the high living standard of today is only possible by increasing the efficiency of energy consumption and the change to a mix of renewable fuels. Huge amounts of unused biomass in terms of agricultural residues like straw, that is a cheap and local feedstock, are often available. But as a reason of the high amount of corrosive ash elements (K, Cl, S), the residues are not suitable for co-firing in a thermal power plant. Therefore the feedstock is converted by low temperature pyrolysis into pyrolysis gases and charcoal. The aim of this work is to obtain fundamentals for an advanced pyrolysis model approach by the results of the pilot plant for co-firing the pyrolysis gases in a thermal power plant. A 3 MW pyrolysis pilot plant is being operated since 2008. For the process, an externally heated rotary kiln reactor with a design fuel power of 3 MW is used. Several mass and energy balances have been calculated based on measured plant data for different operating points of the pilot plant. The high amount of pyrolysis oil in the gas has positive effects to the heating value of the pyrolysis gases. As a reason of that, cold gas efficiencies of more than 70 % are possible. Based on these results, a scale up to a next scale pyrolysis reactor with a capacity of 30 MWth fuel input is currently investigated.

The study investigates for the first time the possibility of using carbon rich paper recovery sludge, and nitrogen rich meat processing industry waste as cultivation medium for the production of high value enzymes needed in the respective industries. The complex cellulose rich deinking sludge was able to support the growth of many industrially relevant enzyme producing microorganisms (Bacillus licheniformis, Candida cylindracea, Aspergillus oryzae, Trichoderma reesei) and of recombinant enzyme producers (Escherichia coli and Pichia pastoris). Further detailed studies with Trichoderma reesei as model organism demonstrated that the organism was able to grow optimally in the presence of 40gL-1 paper sludge as carbon source and 67.5 gL-1 pasteurised blood as nitrogen source substituted in Mandels medium. Under these conditions cellulase activities up to 28.1 nkat FPU were achieved. Anyhow, to achieve these results pretreatment of both waste streams is inevitable. In summary, this study provides the practical basis for a valorisation systems of paper industry waste to produce valuable enzymes to be used on-site in paper processing or for other purposes.

A steam blown dual fluidized bed gasification plant was used to yield a nitrogen (N 2) free product gas (synthesis gas) from various biomass fuels. In addition to the variation of process parameters like temperature, steam to carbon ratio, fluidization rate, and the influence of different bed materials, various feedstock inputs affected the generation of the product gas. This study focuses on the gasification of different biomass feedstock. The variation of biomass implies wood chips, wood pellets, sewage sludge pellets, and straw pellets. The chosen evaluated experimental results are all gained from the uniformly operated "classical" 100 kW "DUAL FLUID" gasifier at Vienna University of Technology at constant gasification temperatures between 800°C and 810°C. In the "classical" design, the gasification reactor is a bubbling fluidized bed. The composition and ash melting behavior of each feedstock is displayed, as well as the ranges of the product gas compositions generated. Beside the main gaseous product gas components, typical content ranges of dust and char are highlighted. The content and composition of tar in the product gas is discussed. Further it is possible to present gravimetrical and gas chromatography coupled with mass spectrometry measured tar values. Not less than five significant component-groups of tar will also be outlined for each feedstock. © 2012 American Institute of Chemical Engineers (AIChE).

Wood pellets have been reported to emit toxic gaseous emissions during transport and storage. Carbon monoxide (CO) emission, due to the high toxicity of the gas and the possibility of it being present at high levels, is the most imminent threat to be considered before entering a pellet storage facility. For small-scale (<30 tons storage capacity) residential pellet storage facilities, ventilation, preferably natural ventilation utilizing already existing openings, has become the most favored solution to overcome the problem of high CO concentrations. However, there is little knowledge on the ventilation rates that can be reached and thus on the effectiveness of such measures. The aim of the study was to investigate ventilation rates for a specific small-scale pellet storage system depending on characteristic temperature differences. Furthermore, the influence of the implementation of a chimney and the influence of cross-ventilation on the ventilation rates were investigated. The air exchange rates observed in the experiments ranged between close to zero and up to 8 m³h^-1, depending largely on the existing temperature differences and the existence of cross-ventilation. The results demonstrate that implementing natural ventilation is a possible measure to enhance safety from CO emissions, but not one without limitations. © 2014 © The Author 2014. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.